New Arai RX-7V NEW Full Face Motorcycle Race Helmet Diamond White

New-Arai-RX-7V-NEW-Full-Face-Motorcycle-Race-Helmet-Diamond-White-01-uw New Arai RX-7V NEW Full Face Motorcycle Race Helmet Diamond White

New Arai RX-7V NEW Full Face Motorcycle Race Helmet Diamond White
Arai RX-7V NEW Full Face Motorcycle Race Helmet – Diamond White. PB SNC2 Shell: Super Fibre and other special synthetic fibres, with superb tensile strength and flexibility characteristics, developed for F-1 helmet visor panel, assembled and bonded by Arai experts, reinforcing across the forehead area (imagine the steel belts used to hold a barrel together) with a variety of carefully stacked and moulded materials. Newly developed resin creates stronger bonds between shell materials with less weight. Diffuser Type 12: New Type 12 diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous Type 10 diffusers, the efficiency of the intake scoops of the new Type 12 diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions; closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Eco Pure Liner: The fully removable interior liner system has been improved with new Eco Pure material, which helps maintain neutral acidity levels close to human skin and antibacterial consumption. With the aim of a softer, deeper and even more comfortable fit we developed a new softer liner frame material. The new liner also has adjustable temple padding that allows for a customised fit. VAS V MV Shield: VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. IC Duct5: The new IC Duct5 provides 11% more airflow than the previous Delta Duct5. The new bigger switch makes opening and closing easier. The new IC duct-5 has three positions; closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed – Chin Cover: Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Full Support Interior: FCS Cheek pad with ear pocket recess for speakers and 5mm peel away layer for added room if needed. Larger space in mouth area for a more open feeling. Smaller NE nozzle without reduced exhaust efficiency. New emergency release tab positioned at the end of the release strap for easier access by rescue staff. Im- proved comfort performance with better fitting while being easier to put on and off. Rounder, smoother, stronger shell: The outer shell of Arai helmets is designed to glide without unnecessary resistance. You dont want to decelerate your helmet more than necessary. Thats why all Arai vents and ducts are designed to break off during an impact. Stronger outer shell, softer inner shell: Arai uses a stronger outer shell to spread impact forces and a softer inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape: The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the heads natural shape for improved comfort, fit and to help minimise wind turbulence. All-day comfort: All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested: All Arai helmets are penetration tested, (except Freeway-2, Penta, Astro-Light and VX-Pro Jr) although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device: The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Five times inspected: Each Arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior: The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water – Handmade: It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. PLEASE NOTE: ALL OUR HELMETS WILL BE SUPPLIED WITH ECE2205 CERTIFICATION AS WE ARE BASED IN THE UK. THIS MEANS THAT OUR HELMETS WILL NOT HAVE DOT/SNELL/ANY OTHER APPROVAL LABELS ATTACHED, AND THEREFORE WILL PROBABLY NOT BE CLASSED AS ROAD LEGAL WITHIN YOUR COUNTRY IF YOU ARE OUTSIDE THE EU. The RX-7V represents the summit of Arais knowledge, experience and know-how in helmet technology. With a completely new PB-SNCĀ² outer shell, the revolutionary VAS (Variable Axis System) visor system and a significant increased smoother area around the temples, the RX-7V offers the new benchmark in the premium helmet segment. From the also new Eco Pure liner with an even slimmer frame, to the new ducts, improved diffuser and the integrated Air Channels, every part shows the attention to detail that is so typical for Arai. Arai has continually improved the glancing off performance by learning from real scenarios. Thanks to the new stronger and smoother shell and VAS, the RX-7V is closer to the ideal helmet shape than ever. With VAS, the visor mounting position is lowered 24mm in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for the shell to be completely smooth above the test line of the Snell standard. Brand : Arai Item : Helmet Model : RX-7V Type : Full Face Shell : Multi-Composite Pinlock : Condition : New SKU : 135010. UK is Mainland Only. Europe is defined as Austria, Belgium, Czech Republic, Denmark, France, Germany, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Slovakia, Spain, Switzerland. Other countries such as Malta, Greece etc will be charged extra. We do NOT post to PO BOX addresses. The item “New Arai RX-7V NEW Full Face Motorcycle Race Helmet Diamond White” is in sale since Wednesday, May 26, 2021. This item is in the category “Vehicle Parts & Accessories\Clothing, Protective Gear & Merchandise\Helmets & Accessories\Motorcycle & Motorsports Helmets”. The seller is “bikersworldonline” and is located in Coleshill. This item can be shipped to European Union member countries.
  • Brand: Arai
  • Gender: Men’s
  • Use: Motorcycle
  • Style: Full Face
  • Manufacturer Part Number: 135010
  • Model: RX-7V
  • Main Colour: Diamond Black
  • Shell Construction: Multi-Composite
  • Features: ACU Approved

New Arai RX-7V NEW Full Face Motorcycle Race Helmet Diamond White
- No Comments on this Post -